Twin Mould M7MI Clay Brick Making Machine

1. Basic introduction:

M7MI clay brick making machine is a movable hydraulic brick making machine, its power source is diesel engine, using earth or soil or clay as raw materials, it has two working platform, so its daily productivity can reach 3840 pieces.

2. Product parameters for M7MI TWINdiesel hydraform brick machine

3. FAQ about M7MI TWIN diesel hydraform brick machine

(1) What is the clay raw materials formula for this M7MI TWIN diesel brick machine?

There are two formulas:

① 80-90% clay, 6-8% cement, 3% water;

② 97% clay,3% water .

(2) What is the advantages of the M7MI TWIN diesel hydraform brick machine?

① Diesel engine can avoid the electricity limited in some area where there is power shortage.

② All the concrete pan mixer, hydraulic chamber pressing, raw material loading hopper are all mounted one the chassis of the trailer, can be towed by car or truck to any project site;

③ Hydraulic system presses the brick high density with high strength.

④ The clay brick machine moulds are all via linear cutting and heat treatment, the linear cutting makes the brick size to be accurate and the heat treatment makes brick mould life prolonged.

(3) What kind hydraulic oil is used for this hydraform block machine?

Normally The 46# anti-wear hydraulic oil is used; in some cold area can use 32# hydraulic oil.

(4) What is the installed pan mixer capacity?

Its input capacity is 320L, output capacity is 200L;

(5) Is this diesel hydraform brick machine can make some unique interlocking bricks?

Yes, this M7MI TWIN brick machine can make four directions interlocking bricks, so the produced blocks can interlock each other from front to back, and from top to bottom; it saves cement and mortar in the building process.

(6) How to operate the diesel clay brick machine?

There are two levers for each working platform, after starting the diesel engine, put the soil raw materials into the mould chamber, then press down one lever to make the pressing head press the soil raw materials, there is a meter to show how much pressure, after 15 seconds pressing, then pull up another lever to push out the brick.

(7) How many workers is need for this M7MI TWIN interlocking brick machine?

totally need 3 workers, two operators and one worker to supply the raw materials to the loading hopper for pan mixer and take the mixed well raw materials to the hopper of work platform;

(8) Is there a hydraulic cooling system for the M7MI TWIN interlocking brick machine?
Yes, The Hydraulic cooling system is controlled by a temperature controlling switch, run automatically, according to the hydraulic oil temperature, reducing energy consumption.

(9) How about the brick quality made by the M7MI TWIN hydraform brick machine?

The production of interlocking bricks bearing strength can reach above 12mpa, high compactness, frost resistance, impermeability performance is good, sound insulation, heat insulation.

And also heat preservation performance is good, appearance size accurate, is the ideal environmental protection and building materials equipment.

(10) The M7MI TWIN interlocking clay brick machine can also install electric motor as an optional.